

PE900×1200 Jaw Plate
Compatible model: Shanbao PE900×1200 · Exact-fit aftermarket replacement
Fixed and swing jaw plate set engineered as an exact-fit aftermarket replacement for the Shanbao PE900×1200. Cast from certified Mn18Cr2 and machined to OEM cavity geometry for consistent wear life and predictable product sizing.
Product description
Fixed and swing jaw plate set engineered as an exact-fit aftermarket replacement for the Shanbao PE900×1200. Cast from certified Mn18Cr2 and machined to OEM cavity geometry for consistent wear life and predictable product sizing.
Each unit is supplied with a Material Test Report (MTR) covering chemical composition and hardness, giving you full traceability from melt to machine. OEM cavity geometry is reproduced so the part drops straight in with predictable fit and product gradation.
Specifications
| Application | Jaw Crusher — wear replacement part |
|---|---|
| Compatible model | Shanbao PE900×1200 |
| Brand / OEM reference | Shanbao |
| Category | Jaw Crusher Parts |
| Material | Mn18Cr2 |
| Hardness (typical) | HB 220–250 — initial hardness; work-hardens under impact |
| Material note | Mn18Cr2 high-manganese steel — balanced toughness and hardness for most abrasive duties. |
| Quality docs | Chemical analysis, hardness test, MTR |
| Certification | ISO 9001 certified foundry — Kaixin Certification (CNAS-accredited), valid through June 2028 |
Material & quality
- Mn18Cr2 — Mn18Cr2 high-manganese steel — balanced toughness and hardness for most abrasive duties.
- Every batch is spectro-analysed; hardness is verified before dispatch.
- Dimensional inspection against OEM drawings guarantees interchangeability.
- Supplied with full Material Test Report for procurement traceability.
How the quote is built
We do not publish a list price for this part. Each quotation is calculated for the specific order, because four variables move the cost — and buyers who know them can compare offers on equal terms.
- Alloy grade — Mn18Cr2 versus a lower or higher grade changes both the raw-material cost and the wear life obtained per tonne crushed.
- Casting weight per piece — the largest single cost driver for a Jaw Crusher wear part.
- Order quantity and repeat history — the pattern set-up is amortised across the production run.
- Ferro-alloy market at the time of casting — chrome and manganese are commodity inputs, priced at the rate valid when the heat is scheduled.
The quotation states the alloy, the weight basis and the ship date, so two offers can be compared like for like. Send the crusher model, the quantity and the destination port for a firm figure within 24 hours.
Need a different profile or material?
Tell us your crusher model, cavity type and monthly throughput. We will recommend the optimal profile and alloy, and return a quote within 24 hours.

